Monthly Archives: November 2018

Softether on VPS Using Local Bridge

Local bridge Setup

VPN Server IP: 192.168.7.1

VPN Client IP Range: 192.168.7.50-192.168.7.60

Tap Device name: tap_soft

ifconfig tap_soft
apt-get install dnsmasq
nano /etc/dnsmasq.conf
interface=tap_soft
dhcp-range=tap_soft,192.168.7.50,192.168.7.60,12h
dhcp-option=tap_soft,3,192.168.7.1

config tap

ifconfig tap_soft 192.168.7.1

Add this file to /etc/sysctl.d/to enable ipv4 forwarding

/etc/sysctl.d/ipv4_forwarding.conf

Wih this content

net.ipv4.ip_forward = 1
sysctl --system

Then we add a POSTROUTING rule to iptables

iptables -t nat -A POSTROUTING -s 192.168.7.0/24 -j SNAT --to-source [YOUR VPS IP ADDRESS]
# /etc/init.d/vpnserver restart
# /etc/init.d/dnsmasq restart

 

References
http://blog.lincoln.hk/blog/2013/05/17/softether-on-vps-using-local-bridge/

How to Set Up an IKEv2 VPN Server with StrongSwan on Ubuntu 16.04

sudo apt-get install strongswan strongswan-plugin-eap-mschapv2 moreutils

Creating a Certificate Authority

mkdir vpn-certs
cd vpn-certs
ipsec pki --gen --type rsa --size 4096 --outform pem > server-root-key.pem
chmod 600 server-root-key.pem
ipsec pki --self --ca --lifetime 3650 \
--in server-root-key.pem \
--type rsa --dn "C=US, O=VPN Server, CN=VPN Server Root CA" \
--outform pem > server-root-ca.pem

Generating a Certificate for the VPN Server

ipsec pki --gen --type rsa --size 4096 --outform pem > vpn-server-key.pem
ipsec pki --pub --in vpn-server-key.pem \
--type rsa | ipsec pki --issue --lifetime 1825 \
--cacert server-root-ca.pem \
--cakey server-root-key.pem \
--dn "C=US, O=VPN Server, CN=server_name_or_ip" \
--san server_name_or_ip \
--flag serverAuth --flag ikeIntermediate \
--outform pem > vpn-server-cert.pem
sudo cp ./vpn-server-cert.pem /etc/ipsec.d/certs/vpn-server-cert.pem
sudo cp ./vpn-server-key.pem /etc/ipsec.d/private/vpn-server-key.pem
sudo chown root /etc/ipsec.d/private/vpn-server-key.pem
sudo chgrp root /etc/ipsec.d/private/vpn-server-key.pem
sudo chmod 600 /etc/ipsec.d/private/vpn-server-key.pem

Configuring StrongSwan

sudo cp /etc/ipsec.conf /etc/ipsec.conf.original
echo '' | sudo tee /etc/ipsec.conf
sudo nano /etc/ipsec.conf
config setup
    charondebug="ike 1, knl 1, cfg 0"
    uniqueids=no

conn ikev2-vpn
    auto=add
    compress=no
    type=tunnel
    keyexchange=ikev2
    fragmentation=yes
    forceencaps=yes
    ike=aes128-sha1-modp1024,aes128-sha1-modp1536,aes128-sha1-modp2048,aes128-sha256-ecp256,aes128-sha256-modp1024,aes128-sha256-modp1536,aes128-sha256-modp2048,aes256-aes128-sha256-sha1-modp2048-modp4096-modp1024,aes256-sha1-modp1024,aes256-sha256-modp1024,aes256-sha256-modp1536,aes256-sha256-modp2048,aes256-sha256-modp4096,aes256-sha384-ecp384,aes256-sha384-modp1024,aes256-sha384-modp1536,aes256-sha384-modp2048,aes256-sha384-modp4096,aes256gcm16-aes256gcm12-aes128gcm16-aes128gcm12-sha256-sha1-modp2048-modp4096-modp1024,3des-sha1-modp1024!
    esp=aes128-aes256-sha1-sha256-modp2048-modp4096-modp1024,aes128-sha1,aes128-sha1-modp1024,aes128-sha1-modp1536,aes128-sha1-modp2048,aes128-sha256,aes128-sha256-ecp256,aes128-sha256-modp1024,aes128-sha256-modp1536,aes128-sha256-modp2048,aes128gcm12-aes128gcm16-aes256gcm12-aes256gcm16-modp2048-modp4096-modp1024,aes128gcm16,aes128gcm16-ecp256,aes256-sha1,aes256-sha256,aes256-sha256-modp1024,aes256-sha256-modp1536,aes256-sha256-modp2048,aes256-sha256-modp4096,aes256-sha384,aes256-sha384-ecp384,aes256-sha384-modp1024,aes256-sha384-modp1536,aes256-sha384-modp2048,aes256-sha384-modp4096,aes256gcm16,aes256gcm16-ecp384,3des-sha1!
    dpdaction=clear
    dpddelay=300s
    rekey=no
    left=%any
    leftid=@server_name_or_ip
    leftcert=/etc/ipsec.d/certs/vpn-server-cert.pem
    leftsendcert=always
    leftsubnet=0.0.0.0/0
    right=%any
    rightid=%any
    rightauth=eap-mschapv2
    rightdns=8.8.8.8,8.8.4.4
    rightsourceip=10.10.10.0/24
    rightsendcert=never
    eap_identity=%identity

Configuring VPN Authentication

sudo nano /etc/ipsec.secrets
server_name_or_ip : RSA "/etc/ipsec.d/private/vpn-server-key.pem"
your_username %any% : EAP "your_password"
sudo ipsec reload

Configuring the Firewall & Kernel IP Forwarding

sudo iptables -A INPUT -i lo -j ACCEPT
sudo iptables -A INPUT -p udp --dport  500 -j ACCEPT
sudo iptables -A INPUT -p udp --dport 4500 -j ACCEPT
sudo iptables -A FORWARD --match policy --pol ipsec --dir in  --proto esp -s 10.10.10.10/24 -j ACCEPT
sudo iptables -A FORWARD --match policy --pol ipsec --dir out --proto esp -d 10.10.10.10/24 -j ACCEPT
sudo iptables -t nat -A POSTROUTING -s 10.10.10.10/24 -o eth0 -m policy --pol ipsec --dir out -j ACCEPT
sudo iptables -t nat -A POSTROUTING -s 10.10.10.10/24 -o eth0 -j MASQUERADE
sudo iptables -t mangle -A FORWARD --match policy --pol ipsec --dir in -s 10.10.10.10/24 -o eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 -j TCPMSS --set-mss 1360
sudo nano /etc/sysctl.conf
# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1


# Do not accept ICMP redirects (prevent MITM attacks)
net.ipv4.conf.all.accept_redirects = 0
# Do not send ICMP redirects (we are not a router)
net.ipv4.conf.all.send_redirects = 0


net.ipv4.ip_no_pmtu_disc = 1
sudo reboot

Restart if required

systemctl restart strongswan

References

https://www.digitalocean.com/community/tutorials/how-to-set-up-an-ikev2-vpn-server-with-strongswan-on-ubuntu-16-04
https://www.digitalocean.com/community/tutorials/how-to-set-up-an-ikev2-vpn-server-with-strongswan-on-ubuntu-18-04-2
https://www.howtoforge.com/tutorial/how-to-setup-ikev2-vpn-using-strongswan-and-letsencrypt-on-centos-7/
https://wiki.strongswan.org/projects/strongswan/wiki/ConnSection

Set JAVA_HOME on Linux

Set JAVA_HOME temporary :

export JAVA_HOME=/usr/lib/jvm/default

Set JAVA_HOME permanently for all Users :

sudo nano /etc/profile
export JAVA_HOME=/usr/lib/jvm/default
export PATH=$JAVA_HOME/bin:$PATH
source /etc/profile

References
https://stackoverflow.com/questions/24641536/how-to-set-java-home-in-linux-for-all-users
https://docs.opsgenie.com/docs/setting-java_home
https://bbs.archlinux.org/viewtopic.php?id=222751